straighten

Roof Snow Load

(NBC 2015)
v1.0.1
File:
Project:
Designer:
Date:

Climatic Data

Source
Region
Location
info Location Modified
close

The location data has been modified since the file was saved.

info Location Not Found
close

The location could not be loaded. Make sure the location exists and is shared with you.

Ground snow load
Ss:
Rain Load
Sr:

Factors

Importance Factor, Is:
Basic Roof Factor, Cb:
If Cb left blank, provide the dimensions in the roof geometry to compute Cb
Wind Factor, Cw:
Accumulation Factor, Ca:
(If Caleft blank, Ca will be computed assuming gable roof)
Roof Geometry
Pitch:
/12
Slippery:
Roof Plan dimensions
Dimensions used to calculated Cb if Cb left empty.
Longer dimension, l:
m
Shorter dimension, w:
m
snow gable figure
Thinking...

Specified Snow Load

S = Is[Ss(CbCwCsCa)+Sr] [4.1.6.2]

Factors

User input values:
Ss = 1 / Sr = 1
Importance Factor, ULS: Is = 1.0 / SLS: Is = 0.9
Roof slope = 0 degrees
Slope Factor
For non-slippery roof:
Slope <= 30 degrees.
Cs = 1

ULS:

S = 1.0[1(0.8*1.0*1*1.0)+1] = 1.8kPa

S = 1.8 kPa

S = 37.6 psf


SLS:

S = 0.9[1(0.8*1.0*1*1.0)+1] = 1.62kPa

S = 1.62 kPa

S = 33.8 psf

This information must be read or used in conjunction with Part 4 of the NBC 2015. In the event of discrepancies, Part 4 of the NBC 2015 shall govern.

© 2009–2025 Modulo Software Inc.
info Logged Out
close

You have been logged out of Jabacus at this location because you have signed in at another location.

Login